$162.07 Buy It Now or Best Offer
free,30-Day Returns
Seller Store
() %,
Location: Ontario, California, United States
Ships to: US,
Item: 274137294895
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Placement on Vehicle:Front, Left, Right, Upper, Lower
Type:Control Arm & Ball Joint Assembly
Universal Fitment:No
Control Arm Construction:Forged
Items Included:Mounting Hardware
Custom Bundle:Yes
Interchange Part Number:ES2004S K5208 ES3379T ES3380T K6187T DS1047 K620251 K620252
OE/OEM Part Number:Suspension Kit Control Arms and Ball Joints Assembly,Tie Rod Ends
Superseded Part Number:Front Driver and Passenger Side Replacement
Manufacturer Warranty:10 Year
ECCPP:ECCPP
UPC:Does not apply
Manufacturer Part Number:E81088701CP
Adjustable:Yes
Modified Item:Yes
Kit Parts Included:Control Arm, Ball Joint, Tie Rod, Center Link, Idler Arm
Kit or Single Part:Kit
Greasable or Sealed:Greasable
OE Spec or Performance/Custom:OE Spec
Surface Finish:Polished, Rust Protected
Quantity:12 Pcs
Cross Reference Part Number:K6187T, K5208, ES3380T, K620251
Partslink-number:1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005
Position:for driver & passenger side, front suspension kit
Features:Greasable
Finish:Coated
Cotter Pin Hole:Yes
Material:Alloy Steel
Mounting Style:Bolt-On
eBay 1.Fit For 1995 – 2005 Chevrolet BLAZER All 2WD Models 1996 – 2003 Chevrolet S-10 All 2WD Models 1996 – 2001 GMC JIMMY All 2WD Models 1996 – 2003 GMC SONOMA All 2WD Models 1996 – 2000 Isuzu HOMBRE All 2WD Models 2.Package Includes: 12x Front Suspension Kit Control Arms Tie Rods Center Link Fits Chevy Blazer 2WD 1.Fit For 1995 – 2005 Chevrolet BLAZER All 2WD Models 1996 – 2003 Chevrolet S-10 All 2WD Models 1996 – 2001 GMC JIMMY All 2WD Models 1996 – 2003 GMC SONOMA All 2WD Models 1996 – 2000 Isuzu HOMBRE All 2WD Models 2.Package Includes: 1x Part# Idler Arm – K6187T 2x Part# Front Upper Ball Joints – K5208 2x Part# Front Inner Tie Rods Ends – RWD – ES3380T 1x Part# Front Lower Control Arm And Ball Joint – Passenger Side – RWD – K620251 1x Part# Front Lower Control Arm And Ball Joint – Driver Side – RWD – K620252 2x Part# Front Outer Tie Rods Ends – RWD – ES3379T 2x Part# Tie Rod Adjusting Sleeves – 5/8 Inch X 18 Threads – ES2004S 1x Part# Center Link – RWD – DS1047 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle Front Type Control Arm & Ball Joint Assembly Universal Fitment No Control Arm Construction Forged Items Included Mounting Hardware Custom Bundle Yes Interchange Part Number ES2004S K5208 ES3379T ES3380T K6187T DS1047 K620251 K620252 OE/OEM Part Number Suspension Kit Control Arms and Ball Joints Assembly,Tie Rod Ends Superseded Part Number Front Driver and Passenger Side Replacement Manufacturer Warranty 10 Year Brand ECCPP Manufacturer Part Number E81088701CP Adjustable Yes Modified Item Yes Kit Parts Included Control Arm,Ball Joint Kit or Single Part Kit Greasable or Sealed Greasable OE Spec or Performance/Custom OE Spec Surface Finish Polished, Rust Protected Quantity 12 Pcs Kit Parts Included Control Arm, Ball Joint, Tie Rod, Center Link, Idler Arm Cross Reference Part Number K6187T, K5208, ES3380T, K620251 Partslink-number 26054934, 8260549340 15003924,15003923,0645217,12541400 Position for driver & passenger side, front suspension kit Partslink-number 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 Features Greasable Finish Coated Cotter Pin Hole Yes Material Alloy Steel Mounting Style Bolt-On Item Specifics Placement on Vehicle Front Type Control Arm & Ball Joint Assembly Universal Fitment No Control Arm Construction Forged Items Included Mounting Hardware Custom Bundle Yes Interchange Part Number ES2004S K5208 ES3379T ES3380T K6187T DS1047 K620251 K620252 OE/OEM Part Number Suspension Kit Control Arms and Ball Joints Assembly,Tie Rod Ends Superseded Part Number Front Driver and Passenger Side Replacement Manufacturer Warranty 10 Year Brand ECCPP Manufacturer Part Number E81088701CP Adjustable Yes Modified Item Yes Kit Parts Included Control Arm,Ball Joint Kit or Single Part Kit Greasable or Sealed Greasable OE Spec or Performance/Custom OE Spec Surface Finish Polished, Rust Protected Quantity 12 Pcs Kit Parts Included Control Arm, Ball Joint, Tie Rod, Center Link, Idler Arm Cross Reference Part Number K6187T, K5208, ES3380T, K620251 Partslink-number 26054934, 8260549340 15003924,15003923,0645217,12541400 Position for driver & passenger side, front suspension kit Partslink-number 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 Features Greasable Finish Coated Cotter Pin Hole Yes Material Alloy Steel Mounting Style Bolt-On Discount Targeted Disounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means ECCPPAUTOPARTS won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales Pair For 2007-2014 Chevy Silverado Sierra Towing Power Heated LED Signal Mirrors USD 120.99 Front Or Rear Wheel Bearing Hub For Buick Rendezvous Lesabre Chevrolet Impala USD 39.99 12V Universal Low Pressure 5-9 PSI Electric Fuel Pump Installation Kit E8012S USD 13.99 2 For Ford F150 Excursion Ranger 1998 1999 2000-2010 Remote Keyless Entry System USD 8.09 Pair Front Or Rear Wheel Hub Bearing For Chevy Impala Pontiac Grand Prix Venture USD 60.86 Newly Listed Steering Kit 4PCS Upper Lower Ball Joint Fits 1997-04 Mitsubishi Montero Sport USD 50.59 Front Anti Sway Stabilizer Bar Linkage Suspension Part For 2005-18 Chrysler 300 USD 28.89 Driver & Passenger Lower Control Arms For 2001-2004 2005 Honda Civic & Acura EL USD 70.85 6Pcs Front & Rear Upper Lower Control Arms Steering Part Fits Grand Cherokee USD 138.79 2PCS Front Upper Left & Right Control Arms Suspension Kit For Lincoln & Ford USD 65.51 12x Front Suspension Kit Control Arms Tie Rods Center Link Fits Chevy Blazer 2WD 1.Fit For 1995 – 2005 Chevrolet BLAZER All 2WD Models 1996 – 2003 Chevrolet S-10 All 2WD Models 1996 – 2001 GMC JIMMY All 2WD Models 1996 – 2003 GMC SONOMA All 2WD Models 1996 – 2000 Isuzu HOMBRE All 2WD Models 2.Package Includes: 1x Part# Idler Arm – K6187T 2x Part# Front Upper Ball Joints – K5208 2x Part# Front Inner Tie Rods Ends – RWD – ES3380T 1x Part# Front Lower Control Arm And Ball Joint – Passenger Side – RWD – K620251 1x Part# Front Lower Control Arm And Ball Joint – Driver Side – RWD – K620252 2x Part# Front Outer Tie Rods Ends – RWD – ES3379T 2x Part# Tie Rod Adjusting Sleeves – 5/8 Inch X 18 Threads – ES2004S 1x Part# Center Link – RWD – DS1047 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : ES2004S K5208 ES3379T ES3380T K6187T DS1047 K620251 K620252 OE/OEM Part Number : Suspension Kit Control Arms and Ball Joints Assembly,Tie Rod Ends Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : ECCPP Manufacturer Part Number : E81088701CP Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm,Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Quantity : 12 Pcs Kit Parts Included : Control Arm, Ball Joint, Tie Rod, Center Link, Idler Arm Cross Reference Part Number : K6187T, K5208, ES3380T, K620251 Partslink-number : 26054934, 8260549340 15003924,15003923,0645217,12541400 Position : for driver & passenger side, front suspension kit Partslink-number : 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Item Specifics Placement on Vehicle Front Type Control Arm & Ball Joint Assembly Universal Fitment No Control Arm Construction Forged Items Included Mounting Hardware Custom Bundle Yes Interchange Part Number ES2004S K5208 ES3379T ES3380T K6187T DS1047 K620251 K620252 OE/OEM Part Number Suspension Kit Control Arms and Ball Joints Assembly,Tie Rod Ends Superseded Part Number Front Driver and Passenger Side Replacement Manufacturer Warranty 10 Year Brand ECCPP Manufacturer Part Number E81088701CP Adjustable Yes Modified Item Yes Kit Parts Included Control Arm,Ball Joint Kit or Single Part Kit Greasable or Sealed Greasable OE Spec or Performance/Custom OE Spec Surface Finish Polished, Rust Protected Quantity 12 Pcs Kit Parts Included Control Arm, Ball Joint, Tie Rod, Center Link, Idler Arm Cross Reference Part Number K6187T, K5208, ES3380T, K620251 Partslink-number 26054934, 8260549340 15003924,15003923,0645217,12541400 Position for driver & passenger side, front suspension kit Partslink-number 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 Features Greasable Finish Coated Cotter Pin Hole Yes Material Alloy Steel Mounting Style Bolt-On DiscountShippingWarrantyReturnFeedback Targeted Disounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means ECCPPAUTOPARTS won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of ECCPP. All rights reserved.
Frequently Asked Questions About 12x Front Suspension Kit Control Arms Tie Rods Center Link Fits Chevy Blazer 2WD in My Website
appliedpaymentsolutions.com is the best online shopping platform where you can buy 12x Front Suspension Kit Control Arms Tie Rods Center Link Fits Chevy Blazer 2WD from renowned brand(s). appliedpaymentsolutions.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling 12x Front Suspension Kit Control Arms Tie Rods Center Link Fits Chevy Blazer 2WD on appliedpaymentsolutions.com?
appliedpaymentsolutions.com helps you to shop online and delivers Parajumpers to your doorstep. The best-selling Parajumpers on appliedpaymentsolutions.com are: PARAJUMPERS WOMENS FUR TRIM HOODED PARKA COAT NAVY BLUE SIZE S Parajumpers W-Sea Rescue Women Jacket S Slim Fit Beige Ecru Light Hood Short Parajumpers Wind Breaker Long Hooded Parka Jacket Parajumpers Midseason Lightweight Series Down Puffer Winter Jacket Sz XS-S Parajumpers knit & down longline jacket Size Small Parajumpers Black Jacket Women’s Masterpiece Series Mid-Season Equipment Size M Parajumpers Long Bear Down Parka Masterpiece Real Fur Detachable Hood Size M Parajumpers Down coat ladies size S $1.420! VERY RARE! NEW Men’s Parajumpers Sheridan Down Parka – Pencil Grey – L [Rare] PARAJUMPERS Wool Belt Parajumpers $850 Parajumpers Women’s Marion Jacket Size Small NEW New Winkler Compact Axe RnD Full Front Spike in Maple with Tribal Parajumpers down long Parajumpers PARAJUMPERS Women’s Puffer Jacket Size XXS High Fill Down Power Blue s5103 PARAJUMPERS Italian Knit Warm Scarf 100% Wool Beige and Dark Blue Women PARAJUMPERS Black Multipocket Full Zip Belted Parka Jacket Size S Parajumpers Jacket Women Small Black Masterpiece Parka Slim Down Coat Fur Trim * PARAJUMPERS Down Parka High Fill 90/10 Brown Jacket Coyote Fur Hooded Luxury S MSRP $599 Parajumpers PJS Windbreaker Inner Ventilation Mary Todd Ivory Small PARAJUMPERS NEPTUNE PR02-529 Pararescue Utility Jacket Weatherproof Pumpkin S-M Red Parajumper Parka Parajumpers Gobi Black Down Bomber Jacket 2 in 1 Winter Men’s Size L RRP 800$ Parajumpers Fleece Jumper Sweatshirt Men’s Size L Big Logo Long Sleeve Parajampers Masterpiece Winter Full Zip Hooded Down Puffer Jacket Sz Young Small Parajumpers Day Tripper Down Vest Men’s Large Blue $450 EUC PARAJUMPERS High Fill Power Womens Down Quilted Brown jacket Size M Parajumper – Olivia -ightweight jacket women with knit-sleeves Parajumpers Janet Jacket Parajumpers Women Down Jacket Geena XL Beige Short Lightweight Windproof NEW Parajumpers Super Light Weight Down Jacket Womens Size M Parajumpers Verna Womens Hooded Down Padded Jacket PARAJUMPERS PJS Wool Fleece Sweat Parka PARAJUMPERS PARAJUMPERS PJS Womens Long Bear Down Jacket Masterpiece Series Size XS [Luxury] PARAJUMPERS Long Down Jacket with Fur Hood AC26 Parajumpers PARAJUMPERS SAMPLE DOWN COAT 2 TONE NYLON 222MPWPUFCB33 GREIGE Used MESC-0 Woman’s PARAJUMPERS Kodiak Down Long Parka Black Jacket Size Small Coat Fur Hood Parajumpers Gobi Fur Bomber Jacket Coat Kids Age 14 Parajumpers Jacket XS Parajumpers Parka down Jacket Right Hand Baseball Lined Rush Green Khaki 08911 Parajumpers 13Aw Master Piece Series/Down Vest/-/Nylon/Khaki/Mjckma05 358 Parajumpers shirts Women’s Parajumpers Windbreaker Raincoat Waterproof Navy Parka Jacket Size S Parajumpers Fleece Big Logo Cotton Sweatshirt Jumper Mens Size L Parajumpers Special Edition Perforated Lamb Leather Nylon Windbreaker Womens M Parajumpers Women’s Midseason Lightweight Series Parka in Black Size Small Parajumpers / Navy Down Ladies Good Condition Parajumpers Women’s Down Filling Raspberry Red Gilet Vest size M Parajumpers Women Jacket Nylon Parka Coat Navy Size XL Windbreaker Women’s PARAJUMPERS Long Bear Parka Down Puffer Jacket Coat Slim S XS-S PARAJUMPERS Parajumpers Down Coat Kids Size 8 Parajumpers Italian Parajumpers PJS Tin Sign Board Signage Store Fixtures Parajumpers PARAJUMPERS Fleece gray t shirt size L $745! NWT Men’s Parajumpers Wilbur Down Gilet Vest – Citronelle Yellow – L Parajumpers AUTHENTIC PARAJUMPERS GOBI ECO BOYS HOODED BOMBER NAVY SIZE 10 (KIDS) BRAND NEW PARAJUMPERS Flight Down Jacket Beige M Parajumpers Parajumpers Right Hand Parka / Mens Medium / Navy / NWT Parajumpers Aline Long Puffer in SILVER-GREY Large / 55.5 cm NEW Parajumpers Lightweight Jacket with hoodie size S AUTHENTIC PARAJUMPERS GOBI ECO MEN JACKET LAKE BLUE XL XLARGE BRAND NEW Parajumpers Hermann Man Down Vest Size M Gray Sportswear Casual Parajumpers Long Bear Down Jacket – Women’s, S, Navy /58269/ Parajumpers Jinny Womens Hooded Down Jacket Parajumpers Down Puffer Light Jacket Bomber Dark Blue Size M PARAJUMPERS Hat Beanie Big Central Logo PJS One Size Parajumpers Puffer Down Winter Jacket Women’s Brown Size S RRP £690 Parajumpers Women’s Jacket Size S PARAJUMPERS M size outer jacket Parajumpers PARAJUMPERS PJS ROSS DOWN JACKET MEN PUFFER JACKET PMPUFUL03214 Parajumpers Ugo SL04 Jacket Super Lightweight Awesome Mens Down Coat Anchorage Parajumpers Janet Womens Hooded Down Padded Jacket Parajumpers Cream Caelie Hooded Jacket Size Small Parajumpers puffer PJS down jacketARCTERYX SKI GORPCORE PARAJUMPERS Masterpiece Hooded Jacket Red Women’s Windbreaker Size S Vintage Parajumpers Women’s Long Bear Hooded Down Jacket Fur Trim Parajumpers black long jacket with fur for kids 4yrs old Parajumpers Beige Fur Hooded Kodiak Long Parka Coat Parajumpers Womens Bomber Jacket. S Size. Very Good Condition. Parajumpers Anya Womens Hooded Down Jacket Parajumpers Camel Brown Distressed Leather Women’s Biker Jacket Hooded Size S Parajumpers long bear parka down jacket arctic masterpiece womens xs beige Women’s PARAJUMPERS Light Long Bear Parka Down Puffer Jacket Coat Size M Slim short down Parajumpers Parajumpers Womens Rindou Puffer Toubre Size L NWT parajumpers beige super lightweight jacket size small women’s PJS Downs Power Team Elite – WORLD PEACEKEEPERS Parajumper (PJ) 12″ figure – NEW! PARAJUMPERS Fly Weight Blue Nylon Windbreaker Jacket Size L Parajumpers women’s Jacket size L genuine designer puffa Masterpiece WOMEN’S PARAJUMPERS LONG BEAR BASE DOWN COAT IN BLACK SIZE M Medium PARAJUMPERS MASTER PIECE SERIES “‘ THE PM JCK OWNER MAN”‘ ( MEDIUM) $ 795 Parajumpers women’s windbreaker nylon coat jacket Size : L Parajumpers Miroku Mens Hooded Down Jacket Parajumpers Multipocket Beige Nylon Woman’s Jacket Size S Parajumpers Madras Checkered Shirt sz XXL Parajumpers knit down Parajumpers Parajumpers Kochi-Man Down Nylon Puffer Jacket PARAJUMPERS PJS Denali Women’s Winter Down Parka Jacket Brown Size S RRP £480 PARAJUMPERS MASTERPIECE SERIES Women’s Slim Fit Black Down Jacket Coat S Small Parajumpers Women’s Rebecca Ventilated Windbreaker Lightwear Trench Jacket Ivory Women’s Parajumpers Masterpiece Series Anthology Parka Beige Size S Mens Pullover Fleece Hoodie