$70.0 Buy It Now or Best Offer
free,30-Day Returns
Seller Store 3dprintmall
(2806) 97.8%,
Location: NJ/CA
Ships to: US,
Item: 315128079811
All returns accepted:ReturnsNotAccepted
MPN:Does Not Apply
ANYCUBIC:ANYCUBIC
Mega X:Mega X
3D Technology:FDM
Features:Adjustable Print Speed,DIY Kit,Heated Build Plate
Interface:USB 2.0
Maximum Print Size:Mega X:300mm*300mm*305mm³
Maximum Resolution:0.05-0.3 mm
Nozzle Size:1.75mm
Printing Speed:20~100mm/s
Item Height:553mm
Item Length:500mm
Item Width:500mm
Country/Region of Manufacture:China
California Prop 65 Warning:high temperature
Notice：These printers are returns that have not been inspected and repaired, some are in good condition and some need repair. We are selling these machines at a very low price. Includes anycubic Lifetime technical support, if you receive a printer in bad condition, or receive the wrong machine, please contact us first and we will respond to your message within 18 hours and we will do our best to help you. Used machines are non-returnable and spare parts are not free, thank you. Notice: The picture does not represent the actual size of the machine, please refer to the actual size of the machine. Kobra Go🔥Kobra 2KobraKobra Plus🔥Kobra MaxKobra NeoVyperPrinting TechnologyFDMFDMFDMFDMFDMFDMFDM Build Area8.7″ x 8.7″ x 9.8″8.7″ x 8.7″ x 9.8″8.7″ x 8.7″ x 9.8″11.8″ x 11.8″ x 13.8″15.7” x 15.7”x 17.71”8.7″ x 8.7″ x 9.8″9.6″ x 9.6″ x 10.2″MaterialsPLA, ABS, PETG, TPUPLA, ABS, PETG, TPUPLA, ABS, PETG, TPUPLA, ABS, PETG, TPUPLA, ABS, PETG, TPUPLA, ABS, PETG, TPUPLA, ABS, PETG, TPU Leveling Type25-point auto levelingLeviQ 2.0 auto leveling25-point auto leveling25-point auto leveling25-point auto leveling25-point auto leveling25-point auto leveling Printing Speed＜100mm/s (Recommended 50-60)＜250mm/s (Recommended 150)＜180mm/s (recommended 80-100mm/s)＜180mm/s (recommended 80-100mm/s)＜180mm/s (recommended 80-100mm/s)＜100mm/s (Recommended 50-60)＜180mm/s (recommended 80-100mm/s) Extruder Type:Separated Drive ExtruderDirect Extrudert Double GearsIntegrated Direct DriveSeparated Drive ExtruderSeparated Drive ExtruderIntegrated Direct DriveSeparated Drive Extruder Control Screen2.4″ LCD Screen & Control Knob4.3″ LCD Touch Screen4.3″ LCD Touch Screen4.3″ LCD Touch Screen4.3″ LCD Touch Screen2.4″ LCD Screen & Control Knob4.3″ LCD Touch Screen Platform Material:PEI spring steelPEI spring steelPEI spring steelCarborundum GlassCarborundum GlassPEI spring steelPEI spring steelPre-InstalledX✓✓✓✓✓✓ See details of each item belowKobra 2【Save Time with 5X Faster Printing】Anycubic Kobra 2 upgraded 3D Printer prints the same-sized model at a recommended speed, saving you up to 70% of printing time. The Maximum Print Speed is 250mm/s, Recommended Print speed is 150mm/s, Accelerated Speed is 2500mm/s².【Fast and Precise Leveling】Brand new upgraded LeviQ 2.0 Automatic Leveling System in combination with tailored modular realize smart offset to the Z-axis without manual adjustment. Z-Offset can be customed to cater to various printing needs.【Efficient and Precise Filament Delivery】Dual-geared extrusion structure accurately controls material delivery. Upgraded extruder power reaches up to 60 watts, quickly melts the filament in an enhanced flowability.【Rapid Cooling and Fast Printing】With an optimized dissipation design, the cooling fan reaches up to 7,000rpm. This ensures rapid cooling down of the models and a fast printing experience.【Stable Printing with Double Z-axis Threaded Rod】The Z-axis adopts a double-threaded rod structure, lessening the lifting resistance while printing. It flattens the building platform and reduces the printing layers, bringing excellent printing results even at a faster speed.【Easy Modular Assembly】Assemble Anycubic Kobra 2 with ease in just 10 minutes with only 5 pieces to put together.【Smarter Printing Experience】The 4.3-inch full-colored and sensitive LCD Touchscreen with comprehensive functions and settings offers a better printing experience.【Excellent Customer Service】 Each Anycubic Kobra 2 3D Printer comes with a one-year warranty (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. If you have any questions you can reach usTech SpecsMachine Weight8.4kgMachine Dimensions19.1x173x171in/486*440*435mm(HWD) Printing Volume3.2gal./12.1LPrinting Dimensions 9.8×8.7×8.7in./250x220x220mm(HWD)Nozzle Temperature≤500F/260℃ Nozzle SizeØ 0.4mm (replaceable)Hotbed Temperature≤230F/110℃Printing Speed9.8in./s or 250mm/s(Max.) 5.9in./s or 150mm/s(Typ) ZaxisDouble-Threaded Rod Control Panel 4.3″ LCD Touch-Control ScreenPrinting MaterialPLA/ABS/PETG/TPUPower ButtonPower-Loss RecoveryData Input MicroSD Card Kobra Go3D Printer Auto Leveling: Equipped with the self-developed Anycubic LeviQ auto-leveling system. Only take 5min to level the bed. Precise Detection and Quick to Use, let you free from the tedious manual leveling.Easy to remove models: Compared with other sticker or carborundum glass platforms, it is easier to bend the plate, which realizes easy mold removal and saves maintenance costs.Fast Printing: ANYCUBIC KOBRA GO is designed with separated bowden extruder. With the extruder and the hotend separated, the hotend is lighter, encountering less inertia while moving, allowing faster printing speed. Typical printing speed up to 60mm/s, maximum printing speed of 100mm/s, quick to turn ideas into reality.Fast Assembly & User Friendly: For the assembly tutorial, we have detailed video guidance and user manual guidance, allowing you to enjoy the assembly process and the sense of accomplishment of a successful challenge. The step-by-step assembly process allows you to understand various modules and parts of the ANYCUBIC KOBRA GO in more detail.More Function: ①Smart sensors, No more fear of accidents: The power-off resuming and the filament run-out detection (Needs to Be Purchased Separately) avoid printing failure caused by unexpected power-off or filament run-out, which can reduce the waste of resources and time effectively. ②Knob adjustment is more convenient: Compared to using a screwdriver, the knob XY axis tensioner is easy to adjust the belt tension, which can be operated with hands only without toolsTechnical Specifications● Leveling: 25-point automatic leveling ● Printing platform: 8.7 x 8.7 inches / 220 x 220 mm ● Filament run-out detection: optional ● Printing material: PLA / ABS / PETG & TPU ● Nozzle size: Ø 0.4 mm (replaceable) ● Nozzle temperature: ≤ 500 °F / 260 °C ● Hot bed temperature: ≤ 230 °F / 110 °C ● Printing speed: ≤100 mm/s (Max speed) ● Control panel: 2.4″ LCD screen with a control knob ● Z-axis: single threaded rod ● Printing dimensions: 250 x 220 x 220 mm (HWD) ● Machine dimensions: 490 x 445 x 443 mm kobra neo90% Pre-installed Make It Easy: Anycubic Kobra Neo is a 90% Pre-installed 3D Printer, which make it possible to set up within 10 minutes. It can print perfectly right out of the box and this would make any beginner to be a great printer enthusiast, which is more suitable for beginners than other DIY 3D Printers.Direct Drive Extruder Make It Precise Control: The Direct Drive Extruder realizes smooth feeding and discharging of flaments and compatible with more flexible filament such as TPU/PLA/ABS/PETG. It is more lighter, features less inertia and more precise printing, can restore the form of the model to the greatest extent.PEI Spring Steel Platform Make It Easy Removal & Cost Saving: Compared with other FDM 3d printers, double-sided magnetic PEI spring steel platform is more durable and lasts longer, saving a lot of maintenance costs. You can remove the model easily.25-Point Auto Leveling Make It Smart: Simple operation brings precise detection and fast leveling, helps you from the tedious manual leveling greatly.34.4% Larger Creation Dimension Make It Large: Compared to the last generation Anycubic Mega S, the printing volume of Anycubic Kobra Neo has increased by 34.4% to reach 12.1 liters. The printing dimension is 250x 220x 220mm, equivalent to the size of a standard Size 5 soccer ballMore Function: ①Make It Fast: Anycubic Kobra Neo 3d prints at a recommended typical speed of 50-60mm/s and reaches 100mm/s at its highest, which will save much time; ②Make It Smart: The standard power outage resuming sensor and the optional filament run-out sensor reduces filament waste and save time by avoiding the printing failure caused by the power outage and lack of filament.Customer Services: ANYCUBIC FDM 3d printers come with one-year warranty(The print head with 3 months, the heated bed with 6 months) and lifetime technical support. If you have any question on Anycubic Kobra Neo 3d printer, just click “Ask a question” through our page, we will fast respond within 24 hoursTech SpecsMachine Weight7.4kgMachine Dimensions490x445x443mm(HWD)Printing Dimensions250x220x220mm(HWD)Nozzle Temperature≤500F/260℃Nozzle SizeØ 0.4mm (replaceable)Hotbed Temperature≤230F/110℃Average Print Speed≤100mm/s(Max.)≤60mm/s(Typ.)ZaxisSingle threaded rodControl Panel2.4″ LCD screenLevelingAnycubic LeviQ25-point precise levelingPrinting MaterialPLA/ABS/PETG/TPUFilament run-out detectionOptionalExtruder TypeDirect extruderPrinting PlatformPEI-coated metal sheet220x220mmMemory Card SlotSD CardKobraModular Design & Easy Assembly: ANYCUBIC KOBRA is an all-in-one frame 3D printer, can minimize the shaking to improve the print quality. The modular design allows the printer to be assembled only in 10 minutesIntelligent Auto Leveling 3d printer: ANYCUBIC KOBRA captured with the Self-developed Anycubic LeviQ Leveling Function equipped with 25-point precise leveling up, which can compensate the unevenness of the heated bed automatically, to achieve easy, fast and precise leveling, providing you with a more intelligent printing experience.Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision.Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost.Fast Printing & Large Printing Size: ANYCUBIC KOBRA 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.7×8.7×9.84in / 220x220x250mm, which has enough space and freedom to realize your fantastic creativity.More Function: ①ANYCUBIC KOBRA is equipped with 4.3-inch LCD touch screen, which brings sensitive response and brighter display, offering better using experience; ②All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service.Tech SpecsMachine Weight7kgMachine Dimensions486x486x430mm(HWD) Printing Platform220x220mmPrinting Dimensions 250x200x200mm(HWD)Printing Speed80-100mm/s Average Printing Speed50-80mm/s Nozzle SizeØ 0.4 mm (replaceable)Nozzle Temperature≤500F/260℃Hotbed Temperature≤230F/110℃Extruder TypeIntegrated short-range extruderZ-axisSingle threaded rodMaterial Break DetectionOptionalAnycubic LeviQSmart leveling, 25-point precise levelingPrinting PlatformPEI spring steelControl Panel4.3 inch LCD touch screenPrinting MaterialPLA/ABS/PETG/TPU Kobra PlusMake It Smart: ①25-Point Auto Leveling: Simple operation brings precise detection and fast leveling, helps you from the tedious manual leveling greatly. ②Power off Resume: Equipped with power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of unexpected power failure. ③Equipped with 4.3-inch LCD touch screen, which brings sensitive response and brighter display, offering better using experience;Make It Easy: Modular design Allows the printer to be assembled only in 10 minutes. Easy to use and fast to get started;Make It Solid: Equipped with Double thread Z-axis moving construction. Anycubic Kobra Plus can minimize the shaking, ensurig more model details can be restored. It is also the cornerstone to ensure high printing speed.Make It Precise: Equipped with an all-metal geared extruder, which heats up and melts the filaments quickly, ensuring that the filaments are smooth extremely. At the same time, the 6000RPM dual fans allows the model to cool down quickly. Every component upgraded for easier printing and creative freedom.Make It Large: 2.5 times larger than Anycubic Mega S. 300*300*350mm printing size to satisfy all your 3D printing needs.Customer Services: ANYCUBIC FDM 3d printers come with one-year warranty and lifetime technical support. If you have any question during using, please contact our after-sales team, we will fast respond within 24 hoursTech SpecsMachine Weight11kgMachine Dimensions23.8×22.0x21.5in./605x560x546mm(HWD) Printing Dimensions 13.8×11.8×11.8in./350x300x300mm(HWD)Nozzle Temperature≤500℉/260℃ Nozzle SizeØ 0.4mm (replaceable)Hotbed Temperature≤212℉/100℃Printing Speed≤7.1in./s or 180mm/s Anycubic LeviQSmart leveling 25-point precise levelingZ-AxisDouble-Threaded Rod Extruder TypeSeperated bowdenControl Panel 4.3″ resistive touch-control screenPrinting MaterialPLA/ABS/PETG/TPUPower ButtonPower-Loss RecoveryData Input MicroSD Card Kobra MaxLarge Build Size: ANYCUBIC KOBRA MAX 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, which is enough for daily and household using, providing you larger printing space and more choices of creation.Self-developed Anycubic LeviQ Leveling Function: Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can compensate the heated bed unevenness automatically. Leveling and printing can be completed with one button, simple operation and brings you greater printing experience.Stronger Construction & Higher Precision: ANYCUBIC KOBRA MAX 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the shaking, does not lose steps and more model details can be restored.Filament Runout Detection: Equipped with a filament runout sensor, it can monitor the supply of filament intelligently. If your printer runs out of filament, it will stop automatically without losing your printing progress.100% Satisfaction Service: ANYCUBIC is one of the best 3d printer brands, which provide the best 3d printers for every customer. We also provide the lifetime technical support and 24 hours professional customer serviceTech SpecsMachine Weight16kgMachine Dimensions715x720x665mm(HWD)Printing Volume19.02 gal./72.0LPrinting Dimensions17.7×15.7×15.7in./450x400x400mm(HWD)Nozzle Temperature≤500F/260℃Nozzle SizeØ 0.4mmHotbed Temperature≤194F/90℃Average Print Speed80-100mm/sZaxisDouble threaded rodControl Panel4.3″ LCD touch screenLevelingSmart auto-levelingAutomatically compensate the hot bed unevennessPrinting MaterialPLA/ABS/PETG/TPUFilament run-out detectionSupportExtruder TypeBowden extruder VyperUpgrade Auto Leveling: ANYCUBIC Vyper is one of the very few 3D printers that has auto leveling feature, the intelligent leveling system equipped with 16-point precise pressure strain gauge, which can adjust the uneven hotbed automatically, greatly simplifies your print preparation and improves your print success rate.Large Printing Size: ANYCUBIC Vyper 3D Printer comes with a large build volume of 9.6″(L) x 9.6″(W) x 10.2″(H) / 24.5 x 24.5 x 26cm, which leaves enough space and freedom to fully realize your fantastic creativity.Fast and Stable Printing: Compared with ordinary 3D printers, Vyper’s max printing speed can reach 7.1 in/s / 18 cm/s, which save more time on waiting. High-precision double screw design makes printers run more stable operation and the patented Z-axis can avoid print layer marks, greatly improving the printing details and precision.Durable and Removable Magnetic Platform: ANYCUBIC Vyper’s platform adopts a special coating combined with spring steel, you can remove the models easily with your bare hands simply by taking off the entire platform and then bend it. it can remain flat for decades, beside it’s rust-proof and completely maintenance-free.Widely compatible with PLA/ABS/PETG/TPU filaments.Intelligent Resume Printing Function: Vyper 3D Printer supports automatically resume printing when Power off or the filament is insufficient or breakage, the sensor will pause printing to save time and avoiding material waste. More functions like double fan two-way heat dissipation, 4.3″ LCD screen, Fast assemble, which greatly improved printing experienceTech SpecsMachine Weight10kgMachine Dimensions516x508x457mm(HWD) Print Resolution±0.1mmPrinting Dimensions 260x245x245mm(HWD)Positioning AccuracyX/Y 0.0125mm; Z 0.002mm Extruder NumberSingleNozzle Size0.4mmHotbed Temperature≤230F/110℃Printing Speed≤180mm/s (recommended 80mm/s)Ambient Operating Temperature8°C – 40°COperational Nozzle Temperature≤260°COperational Hot Bed Temperature≤110°CInput Voltage100V/240V AC, 60/50HzOutput Voltage24V/14.6A (350W)Printing MaterialPLA/ABS/PETG/TPU/WoodInput Formats.STL, .OBJ, .AMFOutput FormatsGCodeConnection ModeTrans-flash Card; USB cable(expert users only) Old Models specs：Mega ZeroPrinting Technology: FDM (Fused Deposition Modeling) Build Size: 220mm(L)×220(W)×250mm(H) Layer Resolution: ±0.1mm Positioning Accuracy: X/Y/Z 0.0125/0.0125/0.002mm Extruder Quantity: Single Nozzle Diameter: 0.4 mm Print Speed: 20~100mm/s (suggested 60mm/s)Supported Materials: PLA, TPU, HIPS, PETG, Wood, Can’t print ABS Printing platform:Can’t Heating,doesn’t have heatbed Ambient Operating Temperature: 8°C – 40°C Operational Extruder Temperature: max 255°C Slicer Software: Cura Software Input Formats: .STL, .OBJ, .AMF Software Output Formats: GCode Connectivity: Trans-flash Card; USB cable(expert users only) Input rating: 100V/240V AC, 50/60Hz output rating: 12V/6A（72W） Printer Dimensions: 504mm×396mm×607mm Weight: ~6.4kg Mega-SModeling Technology：FDM (Fused Deposition Modeling） Positioning Accuracy: X/Y 0.125mm,Z 0.002mm Printing Speed: 20~100mm/s Traveling Speed：100mm/s Filament：1.75mm PLA,ABS,HIPS,WOOD, Flexible filament: TPU, PETG Layer Thickness：0.05-0.3mm Nozzle diameter：0.4mm Printing Size：210 x210x205 mm Machine Size： 405x410x453mm Gross weight：~11 kg Input：AC 100-220V 50-60Hz Working Voltage: 12V DC Slice Software: Cura Software Input Formats：STL,OBJ,DAE,AMF Software output Formats: GCode Working Mode：Online or SD offline Max Nozzle Temperature：260℃ Max Hot bed Temperature：110℃ Ambient Operating Temperature: 8℃-40℃ Mega XPrinting Technology：FDM (Fused Deposition Modeling)Build volume：300mm*300mm*305mmPrint accuracy: 0.05-0.3 mmPositioning Accuracy: X/Y 0.0125mm，Z 0.002mmExtruder Quantity: SingleNozzle Diameter: 0.4 mmPrint Speed: 20~100mm/sTravel Speed: 100mm/sSupported Materials: PLA, ABS, HIPS, Wood, etcAmbient Operating Temperature: 8ºC – 40ºC Operational Extruder Temperature: max 250ºC Operational Print Bed Temperature: max 90ºC Slicer Software: Cura Software Input Formats: .STL, .OBJ, .DAE, .AMFSoftware Output Formats: GCodeConnection: SD card/USB cable Input rating: 110V/220V AC, 50/60HzPrinter Dimensions: 500mm * 500mm *553mmWeight: ~14kg Mega ProPrinting Technology:FDM (Fused Deposition Modeling)Build Volume: 210×210×205 mm³Layer Resolution: 0.05-0.3 mmPositioning Accuracy: X/Y- 0.0125mm；Z- 0.002mmExtruder Quantity: SingleNozzle Diameter: 0.4 mmPrint Speed: 20~100mm/s (suggested 60mm/s)Travel Speed: 100mm/sSupported Materials: PLA, TPU, etcAmbient Operating Temperature: 8°C – 40°COperational Extruder Temperature: max 260°C Laser engraving:Image format: bmpEngraving size: 220×140 mm²Engraving mode: bitmapPixel size: 0.05-0.4mm (suggested 0.1mm)Recommended laser intensity: Brown paper – 15%；Wood – 25%Laser height: 1-100mm（suggested 50mm）Mirror image: the default value is recommendedRated power: 1500mwSupported Materials: Leather, Paper, Wood, etcSlicer Software: CuraSoftware Input Formats: .STL, .OBJ,.DAE, .AMFSoftware Output Formats: GCodeConnectivity: SD Card; USB cable(expert users only)Input rating: 110V-220V AC, 50/60HzPhysical DimensionsPrinter Dimensions: 405X410X453mm³Weight: ~15kg Photon Mono 4k [High-speed 3D Resin Printer]: ANYCUBIC Photon MONO 4K 3D printer is upgraded with 4k monochrome LCD with 35um XY pixels, is one of the greatest accuracies in 3D printing field. The 7% high light transmittance could absorb higher curing UV power for faster printing and curing speed, the single-layer exposure and curing time is as low as 1.5s. The printing speed can reach up to maximum 50mm/h. 2.5X faster than original 2k printer.[4K High Resolution & Higher Accuracy]: This newly high resolution 3840×2400 MONO 4K resin printer has smaller pixel and sawtooth texture, to print more delicate and smooth surface; and MONO 4K uses a high contrast ratio more than 350:1 monochrome screen, which makes the image in the exposure areas more accurate and produce highly-detailed prints with clearer and sharper edges and corners, thus improving the quality and success rate of printing, also greatly reducing the residue in resin vat.[6.23″ Large Screen & Larger Print Size]: The Photon Mono 4K is equipped with a decent 6.23″ screen, which is 29% larger than the Anycubic Photon’s 5.5” in screen area. It can also print up to 6.5×5.2×3.1in at a time, which offers your creations more possibilities.[Adjustable Power & Universal Compatibility]: With 30%-100% light power regulation, Anycubic Photon Mono 4K supports not only ordinary 405nm UV resins, but also special resins, making it compatible to more materials and environments. In addition, adjusting the light power appropriately can extend the lifespan of both the screen and light significantly.[Improved LCD Protection]: Compared to all other mono series LCD printers in the market, for many LCD screen problems, Our MONO 4K screen printer has added a replaceable anti-scratch film between the protective film and the screen itself to improve the protection for screen, and comes with one-piece extra protective film for replacementTechnical Specifications ● Exposure screen: 6.23’’ monochrome ● Printing dimensions: 6.5 x 5.2 x 3.1 in. / 165 x 132 x 80 mm (HWD) ● Light transmittance: 7% ● Contrast ratio: 400:1 ● Light source: Parallel matrix (LED x 15) ● Power density: 3,500 – 4,000 μw/cm²/23,905 – 27,320 lux ● Printing accuracy: 3,840 x 2,400 px (4K) ● Suggested layer thickness: 0.01 – 0.15 mm ● Horizontal resolution: 35 μm ● Printing speed: ≤ 50 mm/hr. / 1.97 in./hr. ● Control panel: 2.8’’ TFT touch-control ● Data input: USB-A 2.0 ● Power supply: 45W ● Software: Photon Workshop ● Machine dimensions: 15.1 x 8.9 x 8.7 in./383 x 227 x 222 mm (HWD) ● Machine weight: 9.4 lb./4.3 kg Photon Mono X 6k Protect What Matters–In order to better protect its premium screen, Anycubic Photon Mono X 6K added a dedicated and replaceable anti-scratch film above the screen itself, making that expensive screen much more durable than its rivals. 6K Vivid Details–With 5,760 x 3,600 px resolution, Anycubic Photon Mono X 6K’s screen has a total number of over 20 million pixels, which is 125% higher than Anycubic Photon Mono X and its rivals’ 4K resolution screen. High resolution brings vivid details to your 3D models. Sharp Edges and Corners–Adopting an industry-leading screen with 350:1 contrast ratio, 75% higher than Anycubic Photon X and its rivals’ 200:1, Anycubic Photon Mono X 6K provides your 3D models with extremely sharp and clear edges and corners. Print, One Step Ahead–With an impressive print speed at ≤ 80 mm/hr. / 3.15 in./hr., Photon Mono X can print a typical 12cm / 4.7in. model in 1.5 hours, which takes 4.5 hours less than Photon’s 6 hours, and 1.5 hours less than its rivals’ 3 hours. Fast printing saves your time wasted on waiting. High Light Transmittance–Anycubic Photon Mono X 6K is equipped with an industry leading screen with 6% light transmittance, which is 200% higher than Anycubic Photon Mono X and its rivals’ 2%. High light transmittance makes quick forming possible. Specs: ● Exposure screen: 9.25’’ monochrome ● Printing volume: 199.1 oz. / 1.6 gal. / 5.9 L ● Light transmittance: 6% ● Contrast ratio: 350:1 ● Light source: Parallel matrix (LED x 40) ● Power density: 5,000 – 6,500 μw/cm² / 34,150 – 44,395 lux ● Printing accuracy: 5,760 x 3,600 px (6K) ● Horizontal resolution: 34 μm ● Printing speed: Max 80mm/h ● Control panel: 3.5’’ TFT touch-control ● Data input: USB-A 2.0 / LAN ● Power supply: 120W ● Screen area: 38.22 in² / 248.75 cm² ● Machine dimensions: 18.7 x 11.4 x 10.6 in. / 475 x 290 x 270 mm (HWD) ● Machine weight: 24.3 lb. / 11 kg Photon Mono XSafe Design–Printer will be immediately shut off if the top cover has been removed. This feature is turned off by default Fast Printing Speed–The time of exposure is as low as 1.5-2 seconds, and the max print speed is 60mm/h, making printing speed 3X faster than the Photon. High Performance Z-axis–The Z-axis is supported by dual linear rails，stepper motor and clearance nut combination which dramatically improves stability while in motion and reduces the risk of layer shifting. New Matrix UV Light Source–High quality quartz lamp bead and new matrix design for uniform UV light energy. 4K monochrome LCD delivers high-quality prints Large Build Volume–A large build area for your 3D-printed creations :192mm(L）*120mm(W）*245mm（H） Technical Specifications ● System : ANYCUBIC Photon Mono X ● Operation : 3.5 inch Touch Screen ● Build Volume: 192mm(L）*120mm(W）*245mm（H） ● Light-source: high-quality filament（wavelength 405nm） ● XY Res.: 0.050mm 3840*2400（4K） ● Z Axis Res.: 0.01mm ● Layer Res.: 0.01-0.15mm ● Printing Speed: MAX 60mm/h ● Rated Power: 120W ● Material: 405nm UV Resin ● Software : ANYCUBIC Photon workshop ● Connectivity : USB ● Technology: LCD-based SLA ● Printer Size : 270mm(L)*290mm(W)*475mm(H) ● Net Weight: ~10.75kgPhoton M3 Plus:Well-defined Details–Equipped with a 9.25’’ 6K exposure screen, the printer provides a large print size of 245*197*122mm and high accuracy of 34μm. The high-precision Z-axis ball screw combined to deliver fine details. Smart Resin Filling–The new automatic feeding function automatically feeds the resin vat when resin is insufficient and stop when resin is enough. Foundation Is the Key–The laser engraving pattern after repeated designs and tests greatly increases the adhesion at the bottom of the platform and improves the printing success rate. Speed Up Your Experience–The self-developed Anycubic LighTurbo features matrix-arranged LCD beads, which provide strong light power, making high-speed printing possible. Every Minute Counts–The maximum printing speed can reach up to 100mm / h. It takes only 1.2 hours to print a 120 mm high model, saving 1.8 hours compared with 3 hours of competitive products. Technical Specifications ● Exposure screen: 9.25 inch monochrome screen ● Printing volume: 5.9 liters / 199.1 ounces ● Print size: 245 x 197 x 122 mm / 9.6 x 7.8 x 4.8 inches (HW) ● Printing platform: Laser engraved aluminum alloy platform ● Light source: Parallel matrix light source (40 LED beads) ● Machine leveling: 4-point manual leveling ● Printing accuracy: 6K (5,760 x 3,600 pixels) ● Printing speed: ≤100 mm/hour ● Control panel: 5-inch resistive touch screen ● Data input: USB-A 2.0 & 3.0 interface ● Power supply: On/Off switch ● Rated power: 144W ● Machine dimensions: 475 x 360 x 290 mm (HW) ● Machine weight: ~12kg Photon M3【Details Above Everything 】Photon M3 features 4K+ ultra-high resolution and a high contrast ratio of 400:1 for more vivid details and sharper model edges, giving you great print quality.【Larger Print Volume】The Photon M3 is equipped with a 7.6-inch LCD screen with a print volume of 163x 102 x 180 mm, 30% larger than the common 6.66″ 3D printer.【Faster Print Speed】Max print speed is 50mm/h, 25% faster than competing products’ 40mm/h.It only takes 2.5 hours to print a 12cm model, saving printing time even better.【Higher Printing Success Rate】Photon M3 is equipped with a Laser-engraved platform, which has stronger adhesion than ordinary platforms, greatly improving the success rate of printing and making printing easier.【Warranty and Service】We provide a one-year warranty for M3 printers, and have a professional technical team and customer service to answer any questions about the use of the machine, please feel free to communicate with usTechnical Specifications ● LCD screen: 7.6 inches monochrome screen ● Printing accuracy: 4,096 x 2,560 pixels ● Printing volume: 2.99 l / 101.19 oz ● Light transmittance: 4% ● Contrast ratio: 400:1 ● Light source: parallel matrix light source ● Printing platform: laser-engraved aluminum alloy platform ● Printing speed: ≤ 50 mm /1.97 inches per hour ● Control panel: 2.8-inch resistance touch screen ● Data input: USB-A 2.0 interface ● Rated power: 55W ● Print size: 180 x 163 x 102 mm / 7.1 x 6.4 x 4.0 inches ● Machine size: 425 x 269 x 256 mm / 16.7 x 10.6 x 10.1 inches. (HLW) ● Machine weight: 7 kg / 15.4 LBS Photon M3 MAXExtraordinary Printing Size, Anycubic Photon M3 Max with a 11.7” x 6.5” x 11.81” building size, which is the largest one of Anycubic resin 3d printer so far. The practical printing volume can meet the printing needs of your large-scale models, while achieving batch printing and improving production efficiency.Well-defined Print Details. comes with a 13.6’’ 7K HD Mono Screen, Photon m3 max achieves the large size printing while maintaining the precision of the model. Coupled with the Z-axis rail of the ball screw, and the high contrast ratio of 450:1, it can better reproduce the details, making your model more different.Fast Printing Speed. The ANYCUBIC Photon M3 max mono screen is composed of 84 LED lights neatly arranged, providing a powerful matrix light source that shortens the printing time of each layer to 3 seconds, and can achieve fast printing of up to 60mm/h.Automatic Resin Feeding, Anycubic Auto Resin Filler can intelligently replenish resin and stop replenishing, reducing printing failures caused by insufficient resin, making your time more free.Upgraded Function. Photon M3 Max adopts laser engraving 3D printing platform, which has better platform adhesion than brushed platform and improves success rate. At the same time, anti-scratch film can reduce the screen damage caused by resin leakage and save the high cost of replacing the screenTech SpecsMachine Weight21kg/46.3lb.Machine Dimensions23.5×15.7×16.1in./596x400x408mm(HWD)Printing Volume14.7L/498.5oz.Printing Dimensions11.8×11.7×6.5in./300x298x164mm(HWD)Printing Speed≤60mm/hrMachine Leveling4-point manual levelingLight SourceParallel matrix (LED lights x 84)Z AxisDouble guide railsResin VatOne-piece design with scale linesSmart Resin FillingIntelligent resin filling and stoppingExposure Screen13.6″ monochrome6,480 x 3,600px (7k)450:1 contrast ratio2,000 hours lifespanBuild PlatformLaser engraving platformControl Panel4.3″ resistive touch-controlRemovable CoverBlocks 99.95% of uv radiationScreen ProtectorReplaceable anti-scratch filmPower Supply120W rated powerData InputUSB Type-A 2.0 Photon Mono X6ks 【9.1 inch 6K Screen】ANYCUBIC Photon Mono X 6Ks resin printer uses a 9.1” 6K mono screen with a HD resolution of 5760*3600 and a high contrast ratio of 380:1, bringing sharper and delicate details. Comes with a high light transmittance anti-scratch film protector, effectively protecting the screen from wearing and scratches while ensuring printing accuracy. One free extra piece included for easy replacement.【Upgraded LighTurbo Matrix】The upgraded Anycubic LighTurbo matrix light source and high-precision textured optical lens provide a stable and even parallel light source, effectively removing optical layers and grid lines to create a smooth and delicate model surface. The max printing speed reaches 60 mm/h, completing your 3d printing models even sooner.【Stable Printing Sturcture】Photon Mono X 6Ks 3d resin printer adopts dual-linear Z-axis rail and highly wear-resistant POM anti-backlash nuts, restraining the Z-axis’ stability to the micron level, effectively eliminating printing layers and ensuring printing details. Laser-engraved platform has better adhesion than sandblasting ones, greatly reducing fall-offs and warping-ups, bringing you an even better success rate.【Large Printing Dimension】The printing size of ANYCUBIC Photon Mono X 6Ks resin 3d printer is 195.84X122.4X200mm, so you can print small models in one batch to improve the printing efficiency. And the max printing volume is up to 4.76L, making it even more convenient for printing large-sized models.【Upgraded Slicer software】Anycubic Photon Workshop 3.0 brings you an even better slicing experience in punching, supporting, shelling and layout arranging. Simplified UI interface makes slicing easier. The new model repairing function also helps boost the printing success rate. Free to use permanently Photon Mono X2𝐇𝐢𝐠𝐡𝐞𝐫 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲, ANYCUBIC Photon Mono X 2 is equipped with a 9.1” 4K+ large mono LCD screen with a resolution of 4096 x 2560, and a single pixel is able to reach 48μm, which is 4% higher than Photon Mono X, offering 3D printing enthusiasts a greater level of detail printing.𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐋𝐢𝐠𝐡𝐭 𝐒𝐨𝐮𝐫𝐜𝐞, Photon Mono X2 resin 3d printer adopts Anycubic LighTurbo matrix light source, which can project the UV light both parallel and perpendicular to the LCD screen, providing a much more uniform light exposure, thus improving the quality of printed model.𝐒𝐭𝐚𝐛𝐥𝐞 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐞, The use of dual linear guides on the 3d machine Z-axis can effectively reduce the risk of layer shifting. Plus with POM clearance nut combined with a vibration absorption structure to ensure z-axis operation accuracy and eliminate layer lines, making the appearance of the model more smooth.𝐆𝐫𝐞𝐚𝐭 𝐒𝐥𝐢𝐜𝐞𝐫 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲, Anycubic Photon Mono X2 works well on Photon Workshop, CHITUBOX, Lychee etc, slicing software, and the wide compatibility respects your preferences (Please note: Anycubic Cloud service is not supported for Photon Mono X2)𝐋𝐚𝐬𝐞𝐫 𝐄𝐧𝐠𝐫𝐚𝐯𝐞𝐝 𝐏𝐥𝐚𝐭𝐟𝐨𝐫𝐦, The 3d printing platform of Photon Mono X2 has a textured checkerboard pattern that greatly improves adhesion and print success rate, easy to remove 3d models. Anti-scratch flim can protect the LCD screen from resin leakage damage, save the unexpected costs.Tech SpecsMachine Weight15.6lb./7kgMachine Dimensions16.4×11.4×10.2in./417x290x260mm(HWD)Printing Volume162oz./4.8LPrinting Dimensions7.8×7.7x5in./200x196x122mm(HWD)Printing Speed≤60mm/hr. or 2.36in./hr.Machine Leveling4-point manual levelingLight Source≤27,320 lux power densityZ AxisDouble liners with 10 μm accraceResin VatUnibody design with scale linesExposure Screen9.1″ monochrome4K+(4,096 x 2,560px) resolution350:1 contrast ratio5% light transmittance2,000 hours typical lifespanBuild PlatformLaser engraved aluminum alloyControl Panel3.5″ TFT touch-controlRemovable CoverEffectively blocks 99.95% of UV radiationProtection FilmReplaceable anti-scratch filmPower Supply100W rated powerData InputUSB Type-A 2.0 Photon D2[𝐃𝐋𝐏 𝟑𝐃 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲], Anycubic Photon D2 uses thousands of mirrors (DMDs) to concentrate light directly to the bottom of the 3d Printer resin tank, minimizing light source distortion and diffusion, achieving better printing accuracy than LCD 3D machines of the same resolution.[𝐄𝐱𝐜𝐞𝐥𝐥𝐞𝐧𝐭 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲], Due to the Double light uniformity algorithm, Photon D2 3d Printer can raising the light uniformity up to more than 92%. and with an anti-aliasing algorithm, the anti-aliasing effect is significantly enhanced, bringing better details to the miniatures.[𝐃𝐮𝐫𝐚𝐛𝐥𝐞 𝐚𝐧𝐝 𝐒𝐚𝐯𝐢𝐧𝐠], Empowered by the DLP projector that has a lifespan of 20,000 hours, 10X more durable than an LCD printer screen, and printer power is low as 15W, 1/4 of LCD printer, allowing you to save a lot of money.[𝐐𝐮𝐢𝐞𝐭 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 𝐄𝐱𝐩𝐞𝐫𝐢𝐞𝐧𝐜𝐞], Compared with ordinary 3d printers that generate a lot of heat when running, DLP 3d printers generate low heat can be directly dissipated without fans, the sound of the machine working is as low as 35 db and hardly noticeable[𝐋𝐚𝐫𝐠𝐞𝐫 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 𝐃𝐢𝐦𝐞𝐧𝐬𝐢𝐨𝐧], Compared to the Anycubic Photon Ultra, the printing volume of the Anycubic Photon D2 3d machine increases by 62% to reach 130.5mm x 73.4mm x165 mm/5.13 in x 2.88 in x 6.49 in𝐀𝐧𝐲𝐜𝐮𝐛𝐢𝐜 𝐂𝐥𝐨𝐮𝐝 𝐬𝐞𝐫𝐯𝐢𝐜𝐞 𝐢𝐬 𝐧𝐨𝐭 𝐬𝐮𝐩𝐩𝐨𝐫𝐭𝐞𝐝 𝐟𝐨𝐫 𝐭𝐡𝐢𝐬 𝐦𝐨𝐝𝐞𝐥Technical Specifications ● Resin vat: One-piece design with scale line ● Build platform: Laser Carved Metal ● Exposure size: 95.42cm² ● Uniformity: 92% ● light transmittance: 92% ● Projector resolution: 2560*1440 ● Control panel: 2.8″ TFT touch-control ● Machine leveling: Manual(4-point) ● Exposure time: ≥2.5s/layer ● Data input: USB-A 2.0 ● Rated power: 15W ● Printing size: 6.5 x 5.1 x 2.9 in. / 165 x 131 x 73 mm (HWD) ● Machine size: 17.2 x 9.3 x 8.9 in. / 438 x 236 x 226 mm(HWD) ● Machine weight: 8.8 lb./4 kg Photon Ultra𝐃𝐋𝐏 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲, Photon Ultra Resin 3d Printer is a groundbreaking consumer DLP 3D printer. Compared with LCD Screen, DLP Projector can project a beam of higher uniformity, and the light uniformity of the forming surface is greater than 90%, which makes incredibly crisp 3d printing results.𝐃𝐮𝐫𝐚𝐛𝐢𝐥𝐢𝐭𝐲, ANYCUBIC Photon Ultra’s light source system does not need to be replaced as often as an LCD 3D printer and has a life span of over 20,000 hours, 10 times longer than the 2,000 hours for LCD monochrome screens. Maintenance costs have been greatly reduce𝐂𝐨𝐬𝐭-𝐬𝐚𝐯𝐢𝐧𝐠, the rated power of Photon Ultra is as low as 12W, which is about the power of a normal light bulb and only 1/5 of the 60W power of an LCD 3D printer. and low power consumption saves more cost from long printing sessions𝐅𝐚𝐬𝐭 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 𝐒𝐩𝐞𝐞𝐝, the ultra’s blazing-fast optics engine speeds up the printing process to just 1.5 seconds per layer, and the print speed is up to 6 cm per hour, 3X faster than the original ANYCUBIC Photon of 2cm per hour. High-speed printing reduces waiting time.𝐖𝐡𝐢𝐬𝐩𝐞𝐫 𝐐𝐮𝐢𝐞𝐭 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠, ANYCUBIC DLP printers release less heat due to its low power consumption. The heat dissipates through a radiator without containing a cooling fan, and less noise can be heard when the printer is working to ensure a whisper quiet printing environment for users.Technical Specifications ● System: ANYCUBIC Photon Ultra ● Color touch screen: 2.8 inch ● Slicer: ANYCUBIC Photon workshop ● Connectivity: USB ● Printing technology: DLP (Digital Light Processing) ● Light source: DLP optical projector ● Resolution: 1280 * 720 ● XY resolution: 80um (0.080mm) ● Z axis resolution: 0.01mm ● Layer res.: 0.01 ~ 0.15mm ● Print speed: 1.5S / layer Max 60mm/h ● Rated power: 12W ● Printers size: 222mm (L) * 227mm (W) * 383mm (H) ● Build volume: 102.4mm (L) * 57.6mm (W) * 165mm (H) ● Net weight: ~ 4kg Wash&Cure Plus【2-In-1 Wash and Cure Station】 Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing; A professional solution to the messy clean up job of your fabulous prints【Largest Wash Cure Station】It has a large washing volume of 192mm(L) x 120mm(W) x 290mm(H) and curing volume of 190mm(D) x 245mm(H), so you can wash cure models printed by large resin printers such as Photon Mono X, which can dramatically simplify messy post-processing【Real 360° Curing】The 360°auto-rotating curing platform, equipped with L-shape strip light and reflective mirror sticker, enables the wash and cure machine to realize a real thorough curing; Prominently, its L-shaped strip light make the top UV lamp adjustable, solving the problem of model top part curinguspension washing, directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to resinTwo Washing Modes】 A. Basket washing, remove the model and put it into the basket for direct cleaning; B. Suspension washing, directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to resin【Anti-UV Light Hood】The transparent cover of this wash cure machine can block up to 99.95% of ultraviolet rays with a wavelength of 405nm, thus able to be effective in high resin solidification rate; and adopts enclosed washing busket to prevent liquid splashing and volatilizationTechnical Specifications ● Machine: Wash and Cure ● Control method: Digital tube, LED indicator, Control knob ● Rated power: 40W ● Input voltage: AC110/240V 50/60Hz ● UV lights: 405nm ● Time selection: 1-60min ● Machine size: 290mm(L)*270mm(W)*479mm(H) ● Basket washing size: 192mm(L)*120mm(W)*290mm(H) ● Hanging cleaning size: 192mm(L)*120mm(W)*235mm(H) ● Curing size: 190mm(D)*245mm(H) ● Weight: ~6.5kg Wash&Cure 2.0Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It’s a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needsWidely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflowEffective and Diverse Washing Modes: There is a propeller in the bottom of wash cure station, when work, it spins the solution like a little tornado and changes spin direction halfway through the wash , which creates the perfect flow to clean every inch of the print. 2 modes of Cleaning: 1. Basket washing, Remove the model and put it into the basket for direct cleaning; 2. Suspension washing, Directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to resin. The max washing size is 4.72″x2.91″x6.49″ 120x74x165mmAnti-UV Light Hood: The transparent cover of this wash cure machine can block up to 99.95% of ultraviolet rays with a wavelength of 405nm, thus able to be effective in high resin solidification rate; and this wash and curing box adopts sealed cleaning, which effectively prevents the cleaning agent from splashing and volatilization, and provides more safetyTechnical Specifications ● Machine properties: Wash and Cure ● Control method: Digital tube, LED indicator, Control knob ● Rated power: 25W ● Input voltage: AC110/220V 50/60Hz ● UV lights: 405nm ● Time selection:1-60min ● Machine size: 225mm(L) *235mm(W) *365mm(H) ● Washing size: 120mm(L) *74mm(W) *165mm(H) ● Curing size: 140mm(D) *165mm(H) ● Weight: 3.7kg PaymentDelivery detailsTerms of salesAbout usContactPayment1.We accept Paypal,Google Pay,CreditCard,Visa,MasterCard,etc.2.Payment must be within 8 days after you ordered the item.Delivery details1.We cannot arrange shipments on weekend or public holidays.2.Your orders will be shipped out within 1-2 business days after payment received.3.If there is any question about delivery details,please contact us, we’re alwasys at your service. Terms of sales1.The returns should be returned with our original packages. 2.Defective products must be returned within 30 days. 3.Customers must contact us first for the return address. 4.In all cases, buyers pay for the shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. 5.Please kindly feel free to contact us first, if you receive the items with quality problems or damaged, we would like to offer replacement or refund service for you. About us Who are we? Founded in 2015, Anycubic has become one of the most popular 3D printer brands in the market, with around 300 employees based in China.But, we didn’t start fancy as it seems to look today.”Graduated in 2015, I came back to China from New Zealand. I was so excited and full of curiosity when landed in Shenzhen the first time”, James , co-founder of Anycubic and a Ph.D of University of Auckland said. “Lu Ouyang, Anycubic’s Founder and CEO, is my childhood friend. He had a company before Anycubic providing electronic modules and 3D printer accessories for over 4 years.3D printer itself wasn’t our first choice. We hadn’t even had the confidence to rush in. But after seeing clients increasingly relying on us for key components of their DIY printers, We realized we could do it, and do it much better.”“I didn’t think much but only hope to explore more possibilities with the 3D printing technology. There is nothing to be afraid of. So why not make a difference.” Ouyang added. In 2015, Anycubic was founded, without much hesitation. “Following our heart is important. But the real world is harsh. There were so many up and downs. We cannot remember how many sleepless nights out there at the early stage.” Anycubic founders said. After a whole year’s hard work, the 1st model Anycubic Mega came on board in2016. Fortunately our work paid off. Mega became so popular in the market in a short period of time and our journey as a professional 3D printer maker officially started. We all were amazed and excited but we did not stop there. The second and third generations were launched soon after along the way..Indeed, 3D printing technologies can do a lot. But first of all we believe 3D printers should be accessible and affordable to all instead of being rocket science and beyond budget. We believe each one of us deserves the freedom to make our ideas, creativity and imagination a reality. Anycubic is committed to being one of the best choices for freedom to make. 3Dream, for freedom to make, Side by side with you, we know we will make it. For Freedom to Make 3D Printing Education Incubation Project Inspired by Anycubic’ s vision — “For Freedom to Make” — the project is the company’ s 3D printing education incubator founded in Shenzhen on September 2, 2020. It demonstrates Anycubic’ s aspiration of helping everyone achieve the freedom of creation and invention using 3D printing technologies. Deemed Anycubic’ s first high-tech 3D printing incubator, the project aims to support 3D printing basic research and training, and create a 3D printing education ecological circle to encourage more people to explore the applications of 3D printing in different areas. Support will include 3D printing products, printing services and consultancy, among others. Incubated partners will hail from various sectors including but not limited to universities, research institutes, and enterprises. This project indicates Anycubic’s perseverance in exploring the 3D printing world and boosting the development of innovation in the economy and society. Addressing the barriers to STEM education will require a collective effort from both institutions and 3D providers, in which we leverage effectively our resources to initiate four 3D printing camps this summer. The first camp ceremony was held at Yale School of Engineering and Applied Science on April 23 followed by 3 online boot camps known as “ANYCUBIC X Yale Funbotics 3D Modeling and Printing Camp”. Guided by Yale mentors, in all boot camps, the students will learn about the inner workings of 3D printers and how to 3D model as well as 3D print their creations. The Bigger Picture with Education Incubation Project Promoting 3D printing education and research is a marathon not a sprint. The partnership with Yale Funbotics is Anycubic’ s first port of call and the company will continue to work hard to sponsor cooperation with more global universities, research institutes, enterprises, and academic organizations of a global nature and help them achieve success in exploring the world. Contact us via ebay Contact1.Your Positive feedback will be an encouragement for us to offer the better quality and the better service in future.2.If you are not satisfied with them, please contact us first via Contact Seller. Your messages will be answered within 18 Hours.3.We shall try our best to solve your problem to your satisfaction.On Jan 30, 2024 at 07:39:41 PST, seller added the following information:
Frequently Asked Questions About UNREPAIRED Anycubic FDM 3D Printer Resin printer Kobra Series Photon Series Lot in My Website
appliedpaymentsolutions.com is the best online shopping platform where you can buy UNREPAIRED Anycubic FDM 3D Printer Resin printer Kobra Series Photon Series Lot from renowned brand(s). appliedpaymentsolutions.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling UNREPAIRED Anycubic FDM 3D Printer Resin printer Kobra Series Photon Series Lot on appliedpaymentsolutions.com?
appliedpaymentsolutions.com helps you to shop online and delivers Parajumpers to your doorstep. The best-selling Parajumpers on appliedpaymentsolutions.com are: PARAJUMPERS WOMENS FUR TRIM HOODED PARKA COAT NAVY BLUE SIZE S Parajumpers W-Sea Rescue Women Jacket S Slim Fit Beige Ecru Light Hood Short Parajumpers Wind Breaker Long Hooded Parka Jacket Parajumpers Midseason Lightweight Series Down Puffer Winter Jacket Sz XS-S Parajumpers knit & down longline jacket Size Small Parajumpers Black Jacket Women’s Masterpiece Series Mid-Season Equipment Size M Parajumpers Long Bear Down Parka Masterpiece Real Fur Detachable Hood Size M Parajumpers Down coat ladies size S $1.420! VERY RARE! NEW Men’s Parajumpers Sheridan Down Parka – Pencil Grey – L [Rare] PARAJUMPERS Wool Belt Parajumpers $850 Parajumpers Women’s Marion Jacket Size Small NEW New Winkler Compact Axe RnD Full Front Spike in Maple with Tribal Parajumpers down long Parajumpers PARAJUMPERS Women’s Puffer Jacket Size XXS High Fill Down Power Blue s5103 PARAJUMPERS Italian Knit Warm Scarf 100% Wool Beige and Dark Blue Women PARAJUMPERS Black Multipocket Full Zip Belted Parka Jacket Size S Parajumpers Jacket Women Small Black Masterpiece Parka Slim Down Coat Fur Trim * PARAJUMPERS Down Parka High Fill 90/10 Brown Jacket Coyote Fur Hooded Luxury S MSRP $599 Parajumpers PJS Windbreaker Inner Ventilation Mary Todd Ivory Small PARAJUMPERS NEPTUNE PR02-529 Pararescue Utility Jacket Weatherproof Pumpkin S-M Red Parajumper Parka Parajumpers Gobi Black Down Bomber Jacket 2 in 1 Winter Men’s Size L RRP 800$ Parajumpers Fleece Jumper Sweatshirt Men’s Size L Big Logo Long Sleeve Parajampers Masterpiece Winter Full Zip Hooded Down Puffer Jacket Sz Young Small Parajumpers Day Tripper Down Vest Men’s Large Blue $450 EUC PARAJUMPERS High Fill Power Womens Down Quilted Brown jacket Size M Parajumper – Olivia -ightweight jacket women with knit-sleeves Parajumpers Janet Jacket Parajumpers Women Down Jacket Geena XL Beige Short Lightweight Windproof NEW Parajumpers Super Light Weight Down Jacket Womens Size M Parajumpers Verna Womens Hooded Down Padded Jacket PARAJUMPERS PJS Wool Fleece Sweat Parka PARAJUMPERS PARAJUMPERS PJS Womens Long Bear Down Jacket Masterpiece Series Size XS [Luxury] PARAJUMPERS Long Down Jacket with Fur Hood AC26 Parajumpers PARAJUMPERS SAMPLE DOWN COAT 2 TONE NYLON 222MPWPUFCB33 GREIGE Used MESC-0 Woman’s PARAJUMPERS Kodiak Down Long Parka Black Jacket Size Small Coat Fur Hood Parajumpers Gobi Fur Bomber Jacket Coat Kids Age 14 Parajumpers Jacket XS Parajumpers Parka down Jacket Right Hand Baseball Lined Rush Green Khaki 08911 Parajumpers 13Aw Master Piece Series/Down Vest/-/Nylon/Khaki/Mjckma05 358 Parajumpers shirts Women’s Parajumpers Windbreaker Raincoat Waterproof Navy Parka Jacket Size S Parajumpers Fleece Big Logo Cotton Sweatshirt Jumper Mens Size L Parajumpers Special Edition Perforated Lamb Leather Nylon Windbreaker Womens M Parajumpers Women’s Midseason Lightweight Series Parka in Black Size Small Parajumpers / Navy Down Ladies Good Condition Parajumpers Women’s Down Filling Raspberry Red Gilet Vest size M Parajumpers Women Jacket Nylon Parka Coat Navy Size XL Windbreaker Women’s PARAJUMPERS Long Bear Parka Down Puffer Jacket Coat Slim S XS-S PARAJUMPERS Parajumpers Down Coat Kids Size 8 Parajumpers Italian Parajumpers PJS Tin Sign Board Signage Store Fixtures Parajumpers PARAJUMPERS Fleece gray t shirt size L $745! NWT Men’s Parajumpers Wilbur Down Gilet Vest – Citronelle Yellow – L Parajumpers AUTHENTIC PARAJUMPERS GOBI ECO BOYS HOODED BOMBER NAVY SIZE 10 (KIDS) BRAND NEW PARAJUMPERS Flight Down Jacket Beige M Parajumpers Parajumpers Right Hand Parka / Mens Medium / Navy / NWT Parajumpers Aline Long Puffer in SILVER-GREY Large / 55.5 cm NEW Parajumpers Lightweight Jacket with hoodie size S AUTHENTIC PARAJUMPERS GOBI ECO MEN JACKET LAKE BLUE XL XLARGE BRAND NEW Parajumpers Hermann Man Down Vest Size M Gray Sportswear Casual Parajumpers Long Bear Down Jacket – Women’s, S, Navy /58269/ Parajumpers Jinny Womens Hooded Down Jacket Parajumpers Down Puffer Light Jacket Bomber Dark Blue Size M PARAJUMPERS Hat Beanie Big Central Logo PJS One Size Parajumpers Puffer Down Winter Jacket Women’s Brown Size S RRP £690 Parajumpers Women’s Jacket Size S PARAJUMPERS M size outer jacket Parajumpers PARAJUMPERS PJS ROSS DOWN JACKET MEN PUFFER JACKET PMPUFUL03214 Parajumpers Ugo SL04 Jacket Super Lightweight Awesome Mens Down Coat Anchorage Parajumpers Janet Womens Hooded Down Padded Jacket Parajumpers Cream Caelie Hooded Jacket Size Small Parajumpers puffer PJS down jacketARCTERYX SKI GORPCORE PARAJUMPERS Masterpiece Hooded Jacket Red Women’s Windbreaker Size S Vintage Parajumpers Women’s Long Bear Hooded Down Jacket Fur Trim Parajumpers black long jacket with fur for kids 4yrs old Parajumpers Beige Fur Hooded Kodiak Long Parka Coat Parajumpers Womens Bomber Jacket. S Size. Very Good Condition. Parajumpers Anya Womens Hooded Down Jacket Parajumpers Camel Brown Distressed Leather Women’s Biker Jacket Hooded Size S Parajumpers long bear parka down jacket arctic masterpiece womens xs beige Women’s PARAJUMPERS Light Long Bear Parka Down Puffer Jacket Coat Size M Slim short down Parajumpers Parajumpers Womens Rindou Puffer Toubre Size L NWT parajumpers beige super lightweight jacket size small women’s PJS Downs Power Team Elite – WORLD PEACEKEEPERS Parajumper (PJ) 12″ figure – NEW! PARAJUMPERS Fly Weight Blue Nylon Windbreaker Jacket Size L Parajumpers women’s Jacket size L genuine designer puffa Masterpiece WOMEN’S PARAJUMPERS LONG BEAR BASE DOWN COAT IN BLACK SIZE M Medium PARAJUMPERS MASTER PIECE SERIES “‘ THE PM JCK OWNER MAN”‘ ( MEDIUM) $ 795 Parajumpers women’s windbreaker nylon coat jacket Size : L Parajumpers Miroku Mens Hooded Down Jacket Parajumpers Multipocket Beige Nylon Woman’s Jacket Size S Parajumpers Madras Checkered Shirt sz XXL Parajumpers knit down Parajumpers Parajumpers Kochi-Man Down Nylon Puffer Jacket PARAJUMPERS PJS Denali Women’s Winter Down Parka Jacket Brown Size S RRP £480 PARAJUMPERS MASTERPIECE SERIES Women’s Slim Fit Black Down Jacket Coat S Small Parajumpers Women’s Rebecca Ventilated Windbreaker Lightwear Trench Jacket Ivory Women’s Parajumpers Masterpiece Series Anthology Parka Beige Size S Mens Pullover Fleece Hoodie